Fuji Xerox DocuCentre-IV 2060 User Manual Download

Page: 358 / 399

10 Job Status

356

Jo
b

St
at

Public Folder

This feature allows you to store data in the machine and send the data by operating on

a remote machine.
The following describes how to print or delete a job stored in a public folder.

For information on how to operate public folders, refer to "Store for Polling (Storing Files on the
Machine that a Remote Machine can Retrieve)" (P.210).

Note

•

This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.

Select [Public Folder].

Select the job to be printed or deleted.

Note

•

Select [Refresh] to display the updated
information.

•

Select [ ] to return to the previous
screen or [ ] to move to the next screen.

Select any option.

Select All

Selects all jobs. To deselect all the jobs, select this button again.

Delete

Deletes the selected job stored in the public folder.

Refer to "When [Delete] is Selected" (P.356).

Print

Prints the selected job stored in the public folder.

Refer to "When [Print] is Selected" (P.357).

When [Delete] is Selected

Select [Delete].

Delete

Deletes the job.

Important •

Once the job is deleted, it cannot be restored.

Summary of Contents for DocuCentre-IV 2060















































































































































































































































































































































































































Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands

Fuji Xerox DocuCentre-IV 2060, User Manual

Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands