Fuji Xerox DocuCentre-IV 2060 User Manual Download

Page: 93 / 399

Layout Adjustment

Co
py

Select [2 Sided Copying].

Select any option.

1 Sided

Makes a copy of a 1-sided document on one side of paper.

2 Sided

Makes a copy of a 1-sided document on both sides of paper.

2 Sided

Makes a copy of a 2-sided document on both sides of paper.

1 Sided

Makes a copy of a 2-sided document on one side of paper.

Originals

This option is displayed when you select [2

2 Sided] or [2

1 Sided].

Head to Head
Select this option when the front and back sides of the document are in the same
orientation.

Head to Toe
Select this option when the front and back sides of the document are in opposite
orientations.

Copies

This option is displayed when [1

2 Sided] or [2

2 Sided] is selected.

Head to Head
Select this option when you want the orientation of the front and back sides of the
copy to be the same as that of the document.

Head to Toe
Select this option when you want the orientation of the front and back sides of the
copy to be the opposite of that of the document.

Original Orientation

Allows you to specify the orientation of the document so that the machine can identify

the top of the document.

Note

•

If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.

Summary of Contents for DocuCentre-IV 2060















































































































































































































































































































































































































Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands

Fuji Xerox DocuCentre-IV 2060, User Manual

Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands