5 Maintenance
92
M
a
int
e
na
nc
e
5
4
Pinch both sides of the empty staple case with your fingers (1), and remove the staple case
from the cartridge (2).
5
Insert the front side of the new staple case into the staple cartridge (1), and then push the
rear side into the cartridge (2).
6
Push the staple cartridge into the finisher until it clicks into place.
7
Close the finisher front cover.
Note
•
If the front cover is not completely closed, a message will appear and the machine will remain
paused.
Replacing Staple Cartridge (for Finisher-B1)
When the optional Finisher-B1 is installed and the staple cartridge needs to be replaced, a
message appears on the touch screen. When this message appears, load a new staple case
into the staple cartridge.
Important •
The use of staple cartridges not recommended by Fuji Xerox may degrade quality and performance.
Use only staple cartridges recommended by Fuji Xerox.
•
When the machine is in Power Saver mode, exit Power Saver mode by pressing the <Power Server>
button and the <Machine Status> button on the control panel before you replace the staple
cartridge.
•
When replacing the staple cartridge, press the <Machine Status> button and check the current
status for the staple cartridge even when the control panel is lit.
Note
•
To order a staple cartridge, contact our Customer Support Center.
Summary of Contents for DocuCentre-VI C2264
