8 System Settings
196
S
yst
em S
et
tin
g
s
Auto Clear
If a given time period elapses with no operation, the machine automatically returns to
the initial screen.
Set the time from 30 to 240 seconds in 1 second increments. In order not to set this
feature, select [Off].
Note
•
Even if [Off] is selected, when there is no operation for 1 minute on the screen waiting for a
job command after scanning, the machine cancels the waiting condition and starts to
process the job.
1
Select [Auto Clear], and select
[Change Settings].
2
Select [Off] or [On].
3
If you selected [On], set the time.
Auto Job Release
Set the period to cancel the current job and start the next job when an error occurs
(document or paper jams, running out of paper, etc.) during making copies or printing
documents. In this case, jobs that can be continued are limited to those that only use
parts of the machine not affected by the error.
Set the period from 4 to 99 minutes in 1 minute increments. In order not to set this
feature, select [Off].
1
Select [Auto Job Release], and
select [Change Settings].
2
Select [Off] or [On].
3
If you selected [On], set the time.
