Fuji Xerox DocuColor 5065II User Manual Download

Page: 200 / 416

8 System Settings

198

yst
em S

tin

Daylight Savings

With this feature enabled, the machine automatically adjusts the current time when the

summer time starts and ends. Specify the start and end dates of summer time period.

Audio Tones

Select whether or not to sound an alarm, for example when a job ends or there is a fault.

Select [Audio Tones].

Select the item to be set or
changed, and select [Change
Settings].

Note

•

Select [ ] to return to the
previous screen or [ ] to
move to the next screen.

Select the setting value.

Select [Save].

Control Panel Select Tone

Select the sound to be made when a button displayed on the screen is correctly

selected.
You can select the volume from [Soft], [Normal], and [Loud]. To disable the sound,

select [Off].

Control Panel Alert Tone

Select the sound to be made when a button that cannot be selected is selected, or an

error occurs.
You can select the volume from [Soft], [Normal], and [Loud]. To disable the sound,

select [Off].

Base Tone

For a button that toggles (changes setting each time it is pressed), set the sound to be

made when in the home position. In the machine this sound is made when the

<Interrupt> button is released.
You can select the volume from [Soft], [Normal], and [Loud]. To disable the sound,

select [Off].

Machine Ready Tone

Set the sound for when the machine is ready to copy or print, after powering on, for

example.
You can select the volume from [Soft], [Normal], and [Loud]. To disable the sound,

select [Off].

Copy Job Complete Tone

Select the sound to be made when a copy completes normally.
You can select the volume from [Soft], [Normal], and [Loud]. To disable the sound,

select [Off].

Summary of Contents for DocuColor 5065II
































































































































































































































































































































































































































Search results

Summary of Contents for DocuColor 5065II

Reviews:

Related manuals for DocuColor 5065II

Brands by name

Popular brands

Fuji Xerox DocuColor 5065II, User Manual

Search results

Summary of Contents for DocuColor 5065II

Reviews:

Related manuals for DocuColor 5065II

Brands by name

Popular brands