Copy Mode Settings
233
S
yst
em S
et
tin
g
s
Background Suppression Level (Text)
Set the background suppression level for color copying. This setting is valid when [Text] is
selected for [Original Type] on the [Image Quality] screen.
The larger the value, the stronger the effect of removing background noise.
Photo & Text/ Printed Original
Set the type of original when [Halftone] of [Text & Photo] is selected for [Original Type]
in the [Image Quality] screen.
Normal
Copy with standard image quality.
Inkjet Originals
Select when copying an original printed with an inkjet printer. This improves the
recognition of inkjet colors.
Highlighted Originals
Select when copying an original marked with a highlight pen. This improves the
recognition of the highlight pen colors.
Original Type - Lightweight Originals
When [Text] is selected for [Original Type] in the [Image Quality] screen, set whether
to display a special original ([Lightweight Originals]).
Output Orientation - Reverse Order
Specify whether to display [Face Up Reverse Order] under the [Output Orientation] in
the [Output Format] screen.
Output Orientation - Auto (Single Sheet)
Set operations when selecting [Auto] under the [Output Orientation] in the [Output
Format] screen.
Stamp Density
Set the translucency of the stamp printed as annotation.
You can select from three translucency values: 0% (solid), 25%, and 50%. The 0%
represents no translucency.
Note
•
If the stamp with [0%] density is printed over text, the text may no longer be readable.
Stamp Position-Top Left
When selecting [Top Left] under [Annotation - Stamp - Position] in the [Output Format]
screen for printing, you can turn the print position finely.
Set the position in the horizontal direction within the range 0 to 100 and in the vertical
position within the range 0 to 100 in 0.5mm increments.
Stamp Position-Top Center
When selecting [Top Center] under [Annotation - Stamp - Position] in the [Output
Format] screen for printing, you can tune the print position finely.
Set the position in the horizontal direction within the range 0 to 100 and in the vertical
position within the range 0 to 200 in 0.5mm increments.
