10 Machine Status
278
Mach
in
e S
ta
tu
s
Supplies
You can check the status of supplies (consumables) in the [Supplies] screen. The
status of supplies is shown as "Ready", "Replace Soon", or "Replace Now". For toner,
the amount is shown in percentage (0 to 100%).
The following describes the procedure for checking the status of supplies.
For information about how to replace supplies, refer to "Troubleshooting" (P.318).
1
Press the <Machine Status>
button.
2
Select the [Supplies] tab.
Note
•
Select [ ] to display the
previous screen and select
[ ] to display the next screen.
On the [Supplies] screen, you can check the following items.
Note
•
The items displayed vary depending on the options installed.
•
Staple Cartridge is displayed when one of the following options is installed: B-Finisher, C-
Finisher, and C-Finisher with Booklet Maker.
•
Punch Scrap Container is displayed when one of the following options is installed: C-
Finisher and C-Finisher with Booklet Maker.
•
Booklet Staple Cartridge is displayed when C-Finisher is installed.
Important •
If using a partly consumed toner cartridge (such as a toner cartridge removed from another
DocuColor 6075II/5065II unit), the indicated status may not match the actual remaining
amount. When replacing toner cartridges, we recommend that you use new ones.
z
Yellow Toner (Y)
z
Drum Cartridge (R2)
z
Magenta Toner (M)
z
Drum Cartridge (R1)
z
Cyan Toner (C)
z
Waste Toner Container
z
Black Toner (K1)
z
Staple Cartridge (R1)
z
Black Toner (K2)
z
Booklet Staple Cartridge (R2)
z
Drum Cartridge (R4)
z
Booklet Staple Cartridge (R3)
z
Drum Cartridge (R3)
z
Hole Punch Container (R4)
