4 Copy
62
Cop
y
Changing the Number of Copies
You can change the number of copies that is set initially during scanning or copying the
document.
1
Press either [Stop] on the touch
screen or the <Stop> button on the
Control Panel.
2
Select [Change Quantity...].
3
Set the number of copies with the
numeric keypad. The new quantity
must include the number of copies that have already been printed. When reducing the
quantity, you cannot enter a number less than the number of copies that have already
been printed.
4
Press the <Start> button.
Note
•
You can set the values greater than the number of copies that have already copied. If you
set the same value as the number of copies that have already copied, the copy job is not
executed.
Interrupting the Copy Job
You can temporarily suspend the current continuous copy job to give another job higher
priority.
1
Press the <Interrupt> button.
Note
•
The interrupt indicator lights to
indicate that the machine is in
the job interrupt mode.
2
Load the interrupt document and set features if necessary.
3
Set the number of copies with the numeric keypad.
4
Press the <Start> button.
5
After you have finished making the interrupt copy, press the <Interrupt> button.
Note
•
The interrupt indicator goes out to indicate the interrupt is cancelled.
•
Remove the interrupt document from the document glass when using the document glass.
6
Press the <Start> button. The suspended copy job is resumed.
@ @
<Stop> button
@ @
<Interrupt> button
