Scan Mode Settings
245
S
yst
em S
et
tin
g
s
Other Settings
These settings relate to the scanner feature specification.
1
Select [Other Settings].
2
Select the item to be set or
changed, and select [Change
Settings].
Note
•
Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
3
Select the setting value.
4
Select [Save].
Scan Service
Set whether or not to use the scanner feature.
Memory Full Procedure
While scanning an original, if there is insufficient hard disk space for the scanner, a
screen appears, asking how the partly stored data should be handled.
Once a certain time has elapsed with the confirmation screen displayed, the
subsequent processing is determined by these settings.
You can set the time until the memory full procedure is carried out. For information, refer to "Auto Job
Release" (P.196).
Cancel Job
The stored data is discarded.
Run Job
The read-in data is treated as valid, and the part of the original read in is treated as a
complete stored file.
Maximum Stored Pages
Set the maximum number of stored pages of a scan original. You can set a number
from 1 to 999 pages.
Saturation
Set the saturation when scanning a full color original. When carrying out a scan, it is
automatically adjusted according to this setting value.
Background Suppression Level
For a color scan, set the background suppression level. This is valid when [Background
Suppression] is set to [Auto Suppression].
The larger the value, the stronger the effect of removing background noise.
Shadow Suppression Level
Set the show-through prevention level. This is valid when [Shadow Suppression] is set to [On].
.
Color Space
Set whether to display the color space feature.
