4 Copy
56
Cop
y
Copying Procedure
This section describes the basic copy procedures. The following shows the reference
section for each procedure.
Step 1 Loading Documents .........................................................................................................56
Step 2 Selecting Features ............................................................................................................58
Step 3 Entering the Quantity.......................................................................................................59
Step 4 Starting the Copy Job.......................................................................................................59
Step 5 Confirming the Copy Job in the Job Status .....................................................................60
Step 1 Loading Documents
There are two methods for loading documents:
Document feeder
z
Single sheet
z
Multiple sheets
Document glass
z
Single sheet
z
Bound documents, such as books
Document Feeder
The document feeder (250 sheets) supports single and multiple sheet documents with
sizes from 140 x 210 mm (A5, A5 , 5.5 x 8.5 inches, 5.5 x 8.5 inches ) to 297 x 432
mm (A3, 11 x 17 inches).
The document feeder (250 sheets) automatically detects standard size documents. For
non-standard size documents, input the size in the [Original Size] field.
For information on document sizes that can be detected automatically, and for information about
entering document sizes, refer to "Original Size (Specifying the Scan Size for the Document)" (P.83).
Note
•
The standard document sizes that can be auto-detected depend on the [Paper Size
Settings] in the System Administration mode. For information about paper size settings, refer
to "Paper Size Settings" (P.219).
The document feeder (250 sheets) accepts the following number of sheets.
For information about copying documents of mixed size, refer to "Mixed Sized Originals (Scanning
Different Size Documents Simultaneously)" (P.84).
Important •
Place folded or creased documents on the document glass to avoid paper jams in the
document feeder.
•
2 sided scanning of lightweight paper (38 - 49 g/m
2
) is not supported.
Document type (weight)
Number of
sheets
Lightweight paper (38 - 49 g/m
2
)
250
Plain paper (50 - 80 g/m
2
)
250
Heavyweight paper
(81 - 128 g/m
2
)
150
Heavyweight paper
(129 - 200 g/m
2
)
100
