Copying Procedure
59
Cop
y
Step 3 Entering the Quantity
You can enter up to 9,999 for the number of copies.
1
Enter the number of copies using
the numeric keypad. The number
of copies entered appears on the
upper right of the display.
2
If you enter an incorrect value,
press the <C> button and enter the
correct value.
Step 4 Starting the Copy Job
1
Press the <Start> button.
Important •
If the document has been set
in the document feeder, do not
hold down the document while
it is being conveyed.
•
Copies cannot be made when
copying restriction code is
detected.
Note
•
If a problem occurs, an error
message appears in the touch
screen. Solve the problem in
accordance with the message.
•
You can set the next job during copying.
If you have more documents
If you have another document, select the [Next Original] on the touch screen while
the current document is being scanned. You can scan multiple documents for later
output.
2
Select [Next Original] while scanning is in progress.
Note
•
When using the document feeder, load the next document after the machine has finished
scanning the first document.
•
When the above screen is displayed and no operation is performed during a certain period
of time, the machine automatically assumes that there are no more documents.
Numeric keypad
<C> button
@ @
<Start> button
