Layout Adjustment
85
Cop
y
Original Orientation (Specify the Orientation of Loaded Documents)
In order to identify the top of the document, the orientation of the set document must
be configured.
Note
•
If the [Original Orientation] differs from the actual document orientation, then the machine
may incorrectly detect the head of the document.
Upright Images
Select this item when placing the top of the document facing the inner side of the
document glass or document feeder.
Sideway Images
Select this item when placing the top of the document facing the left side of the
document glass or document feeder. Be sure to select [Sideway Images] when the top
of the document is placed facing the left side (horizontal text).
Edge Erase (Erasing Edges and Margin Shadows of the Document)
When you make copies with the document cover open or make copies from a book,
black shadows sometimes appear along the edges and center margin of the paper. If
this happens, you can make copies with the shadows erased.
Important •
Confirm that the orientation of the document and the [Original Orientation] setting of the
[Layout Adjustment] screen are the same.
Note
•
For 2-sided documents, the same border erase amount is set for the top and bottom sides.
•
If you set [Reduce/Enlarge], the edge erase dimensions will be reduced or enlarged in
proportion to the ratio you configured.
1
Select [Edge Erase].
2
Make the necessary settings.
Normal
The border erase amount is set to 2
mm for the top and bottom, and left
and right. If you do not want to
erase the edges, set each value to
0 mm.
Border Erase
Shadows at the
top/bottom/left/right
of the document, or shadows in the center of documents such as booklets or
documents with facing pages, are erased. Border Erase allows adjustment of the erase
amount for each edge or center (gutter) individually.
Edge Erase
Shadows at the
top/bottom/left/right of the document, or shadows in the center of
documents such as booklets or documents with facing pages, are erased. Standard
Edge Erase allows adjustment of the erase amount for top, bottom, left, right, or center
(gutter) individually.
