Layout Adjustment
91
Cop
y
Original Orientation (Specify the Orientation of Loaded Documents)
In order to identify the top of the document, the orientation of the set document must
be configured.
Note
•
If the [Original Orientation] differs from the actual document orientation, then the machine
may incorrectly detect the head of the document.
1
Select [Original Orientation].
2
Select [Upright Images] or
[Sideways Images] in accordance
with the orientation of the
document loaded.
Upright Images
Select this item when placing the
top of the document facing the inner
side of the document glass or
document feeder.
Sideway Images
Select this item when placing the top of the document facing the left side of the
document glass or document feeder. Be sure to select [Sideway Images] when the top
of the document is placed facing the left side (horizontal text).
2 Sided Copying (Making 2 sided Copies)
Copies of 1 sided and 2 sided documents can be made on one side or both sides.
Important •
Confirm that the orientation of the document and the [Original Orientation] setting of the
[Layout Adjustment] screen are the same.
1
Select [2 Sided Copying].
2
Select any item.
1
1 Sided
Makes a copy of a 1 sided
document on one side of the paper.
1
2 Sided
Makes a copy of a 1 sided
document on both sides of the
paper.
2
2 Sided
Makes a copy of a 2 sided document on both sides of the paper.
2
1 Sided
Makes a copy of a 2 sided document on one side of the paper.
