background image

5.1 Scanning Document to Send as E-mail

226

5

E-mail Scanning

4

Select the address number to change or delete, followed by 

Create/

Delete

Selecting the 

 button will display the previous screen and the 

 button the next screen. You can

also use the numeric keypad to enter a 3-digit dial number to Go to to specify the address number
directly.

The Address Number NNN – Create/Delete screen is displayed. 

5

Select E-mail and then 

Detailed Settings

6

When changing the registered contents:

Select the item to change, followed by 

Change Settings

Selecting the 

 button will display the previous screen and the 

 button the next screen. 

“Registering directory” (P. 223) for details on the procedure. 

Create/Delete

Close

Address Book

Address No.

Address

001
002

003

004
005

(Not in Use)

Go to

(001-500)

soumu@mail.net
(Not in Use)

(Not in Use)

(Not in Use)

Close

E-mail

Fax

Address Type

iFAX

Adrress Number 001 - Create/Delete

E-mail Address

1111

Recipient Name

1111

Index

1111

Detailed

Settings

soumu@mail.net

S

Change 

Settings

Reset All

Settings

Close

Address Number 001 - Create/Delete (E-mail)         

Items

Current Settings

1. E-mail Address

soumu@mail.net

2. Recipient Name

3. Index

(Address Not Entered)

S

Summary of Contents for DocumentCentre C240 Series




















































































































































































































































































Reviews: