F Troubleshooting When Using NetWare
254
Ap
pendi
x
*: Refer to “NetWare Online Documentation” for details on how to set and check.
F.2
When “Switch off the power” Appears
F.3
When Target Print Result Is Not Obtained
There are printers with similar
device name on the network.
Switch off the machine and
using NWADMIN from the work-
station, check that the status of
the corresponding printer object
is job waiting.
Using the CentreWare Driver &
Network Utility CD-ROM from
the workstation, set another host
name.
NetWare port is not activated.
Print out the System Settings
List and check if the network
number when using IPX/SPX is
at “00000000” (NetWare server
down). Also, check if the IP
address when using TCP/IP is at
“0.0.0.0” (fixed IP not set or
address supply server (DHCP)
down).
For IPX/SPX, activate NetWare
server. For TCP/IP, set the fixed
IP address or activate the
address supply server (DHCP).
Cause
Verification
Action
An error occurs in NetWare.
Switch the machine off and on.
Switch on the machine only
when there is nothing on the dis-
play.
Cause
Verification
Action
The print language of the print
job is different from that set up
on this machine.
Check the print language of this
machine.
Set the same print language for
the print job and this machine.
Cause
Verification
Action
Summary of Contents for DocumentCentre C240 Series
Page 16: ...Part 1 Printer ...
Page 116: ...4 10 File Upload Printing 103 4 Special Printing 5 Click Start to start printing ...
Page 127: ...Part 2 Scanner ...
Page 238: ...Part 3 Appendix ...
