Using the Operator Panel Menus and Keypad
175
• Clean Developer
Purpose:
To rotate the developer motor and stir the toner in the toner cartridge.
Values:
• Toner Refresh
Purpose:
To use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in a new toner
cartridge.
Values:
• BTR Refresh
Purpose:
To specify whether to execute counter measures for curling/separating discharge of the paper.
Values:
• Initialize NVM
Purpose:
To initialize NVM for system parameters or Address Book data for e-mail and server address. After executing this
function and rebooting the printer, the menu parameters or data, except the parameters for the network, are reset to
their factory default values.
Enter Number
LY, LM, LC
0, 0, 0
*
Sets lateral (perpendicular to paper feed direction) and
process (paper feed direction) color adjustment values
individually for yellow, magenta, and cyan. Enter a number in
order of color adjustment values individually for yellow,
magenta, and cyan.
Enter a number in order of lateral adjustment (left), lateral
adjustment (right), and process adjustment.
-5 – +5
RY, RM, RC
0, 0, 0
*
-5 – +5
Y, M, C
0, 0, 0
*
-5 – +5
Yes
Stirs the toner in a new toner cartridge.
No
*
Does not stir the toner in a new toner cartridge.
Yellow
Yes
Cleans the toner in the yellow toner cartridge.
No
*
Does not clean the toner in the yellow toner cartridge.
Magenta
Yes
Cleans the toner in the magenta toner cartridge.
No
*
Does not clean the toner in the magenta toner cartridge.
Cyan
Yes
Cleans the toner in the cyan toner cartridge.
No
*
Does not clean the toner in the cyan toner cartridge.
Black
Yes
Cleans the toner in the black toner cartridge.
No
*
Does not clean the toner in the black toner cartridge.
Off
*
Does not automatically execute counter measures for curling/separating
discharge of the paper.
On
Automatically executes counter measures for curling/separating discharge of the
paper.
