Basic Operation
25
Setting Initial Settings on the Operator Panel
You need to set the printer language, clock date, and time when you turn on the printer for the first time.
When you turn the printer on, the wizard screen to perform the initial setup appears on the LCD panel. Follow the
steps below to set the initial settings.
NOTE:
•
If you do not start configuring the initial settings,
Ready
appears on the LCD panel in three minutes. After that, you can set the
following initial setup by enabling
Power On Wizard
on the operator panel if needed.
For more information about the operator panel, see "Understanding the Printer Menus" on page 164.
1
Select the language you want to use on the operator panel, and then press the
button.
2
Press the
button to start setting the region.
3
Select your region, and then press the
button.
4
Select the appropriate time zone, and then press the
button.
5
Specify the current date, and then press the
button.
6
Specify the current time, and then press the
button.
7
Press the
button to complete the initial settings on the operator panel.
