224
Troubleshooting
Entering Values
Using the Operator Panel
Enter the values that you found in the color registration chart to make adjustments.
1
Press the
System
button.
2
Select
Admin Menu
, and then press the
button.
3
Select
Maintenance
, and then press the
button.
4
Select
Adjust ColorRegi
, and then press the
button.
5
Select
Enter Number
, and then press the
button.
6
Confirm that
LY
,
LM
, and
LC
appear.
7
Press the or button until you reach the value (for example,
+3
) displayed on the chart.
8
Press the button once and move the cursor to the next color.
9
Repeat steps
7
and
8
to enter all digits, and then press the
button.
10
Confirm that
RY
,
RM
, and
RC
appear.
11
Press the or button until you reach the value (for example,
+3
) displayed on the chart.
12
Press the button once and move the cursor to the next color.
13
Repeat steps
11
and
12
to enter all digits, and then press the
button.
14
Confirm that
Y
,
M
, and
C
appear.
15
Press the or button until you reach the value (for example,
+3
) displayed on the chart.
16
Press the button once and move the cursor to the next color.
17
Repeat steps
15
and
16
to enter all digits, and then press the
button.
18
Select
Color Regi Chart
, and then press the
button.
19
Select
Yes
, and then press the
button.
The color registration chart is printed with the new values.
20
Adjust until all straight lines are at the value of 0.
Viewing the images before and after will help.
