Faxing
197
Using an Answering Machine
You can connect a telephone answering device (TAD) directly to the rear of your printer as shown above.
•
Set your printer to
Ans/FAX Mode
in
Receive Mode
and set
Auto Answer Ans/FAX
in
Auto Answer
Setup
to specify the time for the TAD to respond.
•
When the TAD picks up the call, the printer monitors and takes the line if fax tones are received and then starts
receiving the fax.
•
If the answering device is off, the printer automatically goes into the fax receive mode after the ring tone sounds
for a predefined time.
•
If you answer the call and hear fax tones, the printer will answer the fax call if you
–
Select
Manual Receive
in
OnHook
(you can hear voice or fax tones from the remote machine), and
then press the
(
Start
) button and hang up the receiver.
OR
–
Press the two-digit remote receive code and hang up the receiver.
Using a Computer Modem
If you want to use your computer modem for faxing or for a dial-up Internet connection, connect the computer
modem directly to the rear of your printer with the TAD as shown above.
•
Set your printer to
Ans/FAX Mode
in
Receive Mode
and set
Auto Answer Ans/FAX
in
Auto Answer
Setup
to specify the time for the TAD to respond.
•
Turn off the computer modem's fax-receive feature.
•
Do not use the computer modem if your printer is sending or receiving a fax.
•
Follow the instructions provided with your computer modem and fax application to fax via the computer
modem.
To the
wall jack
Printer
Line
Telephone Answering Device
Phone
To the
Internet
Computer
Printer
Line
Telephone Answering Device Phone
Summary of Contents for DocuPrint CM225FW
Page 1: ...DocuPrint CM225 fw User Guide ...
Page 10: ...10 Contents Technical Support 338 Online Services 339 Index 340 ...
Page 260: ...260 Digital Certificates 11 Digital Certificates Using Digital Certificates on page 261 ...
Page 272: ...272 Troubleshooting 4 Lower the levers to their original position 5 Close the rear cover ...
