Fuji Xerox DocuPrint CM225FW User Manual Download

Page: 306 / 344

306

Troubleshooting

016-930

Remove the device from the USB drive and select

to clear the message.

016-931

016-981

Select

to cancel the current job. Try copying fewer documents.

016-982

The printer memory is full and cannot continue processing the current print job. Select

to clear

the message and cancel the current print job.

016-985

Attached file size is larger than you defined. Select

to clear the message. Try the following:

•

Enlarge

Max E-Mail Size

•

Lower the resolution setting.

•

Change the file format of the scanned image.

017-970

Memory is likely to be full. Select

to clear the message. Try the following:

•

Delete the data stored in the memory.

•

Lower the resolution setting.

•

Reduce the number of pages.

017-980

Select

to clear the message. Retry when the printer does not process any job.

017-981
017-988

Select

to clear the message. Check if the interface cable is securely connected or your computer

does not have any problem.

018-338

Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local
representative office or an authorized dealer.

See also:

•

"Online Services" on page 339

024-340

Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local
representative office or an authorized dealer.

See also:

•

"Online Services" on page 339

024-360
024-371

024-946

Select

to clear the message. Check for any misfed paper in the standard 150 sheet tray, and set

the tray to the printer.

024-958

Load the specified paper and select

to clear the message.

See also:

•

"Loading Print Media in the Standard 150 Sheet Tray" on page 96

024-963

Select

to clear the message and load the specified paper. Follow the on-screen instruction if one

appears.

See also:

•

"Loading Print Media in the Standard 150 Sheet Tray" on page 96

026-720

Select

to clear the message. Check if the USB storage device has enough memory.

026-721

Select

to clear the message. Check if the USB storage device is write-protected or gets any disk

problem.

026-722
026-723

Select

to clear the message. Check if the path and file name to save the data is too long.

026-750

Select

to clear the message. Check if the interface cable is securely connected, or restart the

application you use.

026-751

Select

to clear the message. Check if the interface cable is securely connected.

026-752
031-521

Select

to clear the message. Check if the access setting to the SMB server is correct by

contacting your server administrator.

031-526

Select

to clear the message. Check if the domain name of the SMB server is correct. Check DNS

connection, or check if the name of the forwarding destination server is registered with DNS.

031-529

Select

to clear the message. Check if the Ethernet cable is properly connected and if the

password for the SMB server is correct.

031-530

Select

to clear the message. Check if the working path setting to the SMB server is correct.

Error Code

What You Can Do

Summary of Contents for DocuPrint CM225FW
























































































































































































































































































































































Search results

Summary of Contents for DocuPrint CM225FW

Reviews:

Related manuals for DocuPrint CM225FW

Brands by name

Popular brands

Fuji Xerox DocuPrint CM225FW, User Manual

Search results

Summary of Contents for DocuPrint CM225FW

Reviews:

Related manuals for DocuPrint CM225FW

Brands by name

Popular brands