221
Troubleshooting
The Printer Setting Utility
Using the Printer Setting Utility, enter the values that you found in the color registration chart to make
adjustments.
The following procedure uses Windows XP as an example.
1
Click
start
→
All Programs
→
Fuji Xerox
→
Fuji Xerox Printer Software for Asia-Pacific
→
FX DocuPrint CP205
/
FX DocuPrint CP205 w
→
Printer Setting Utility
.
NOTE:
•
The
Select Printer
window appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in
Printer Name
.
The Printer Setting Utility opens.
2
Click the
Printer Maintenance
tab.
3
Select
Color Registration Adjustment
from the list at the left side of the page.
The
Color Registration Adjustment
page is displayed.
4
Deselect the check box next to
On
.
5
Select the value you checked in the color registration chart, and then click the
Apply New
Settings
button.
6
Click the
Start
button next to
Print Color Regi Chart
.
7
Select the paper size, and then click
OK
.
The color registration chart is printed with the new values.
8
Adjust until all straight lines are at the value of 0. Show image of before and after adjustment will
help.
IMPORTANT:
•
After printing the color registration chart, do not turn off the printer until the printer motor has stopped running.
•
If 0 is not next to the straightest lines, determine the values and adjust the printer again.
Summary of Contents for DocuPrint CP205 w
