Introduction to Your Fuji Xerox Machine
> LED Patterns and Indications (for Models Without an
LCD)
LED Patterns and Indications (for Models Without an LCD)
Related Models
: DocuPrint P235 db
The LEDs on your machine's control panel light up, dim, or blink to indicate machine status.
LED indications are defined in the table below.
LED is off.
or
LED is on.
LED is dimmed.
or
LED is blinking.
This table defines what LEDs indicate when they light up, dim, or blink.
LED indication
Status
Meaning
Sleep
In Sleep mode (Power Save mode), the machine
acts as if it is turned off, but it can still receive data.
Receiving a print job will wake the machine and it
will start printing.
Deep Sleep
In Deep Sleep mode (lower power consumption
than Sleep mode), the machine acts as if it is turned
off, but it can still receive data. If the machine does
not receive data for the length of time you specify, it
enters Deep Sleep mode. Receiving a print job will
wake the machine and it will start printing.
Ready
The machine is ready to print.
Please Wait
The machine is warming up.
Printing
The machine is printing.
Cooling Down
The machine is cooling down.
Wait for 10 minutes or until the inside of the
machine has cooled down.
9
Summary of Contents for DocuPrint P235 d
