Fuji Xerox DocuPrint P255 dw User Manual Download

Page: 208 / 252

208

Troubleshooting

The Output Is Too Light

NOTE:

•

If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.

Problem

Action

The output is too light.

The toner cartridge may be low or need to be replaced. Confirm the
amount of toner in the toner cartridge.

Check the toner level on the

Consumables

tab of the

Printer

Status

window of the SimpleMonitor.

Replace the toner cartridge as needed.

Verify that the print media is dry and the correct print media is used.
If not, use the print media recommended for the printer.

See also:

• "Usable Print Media" on page 119

Try changing the

Paper Type

setting on the print driver.

On the

Paper/Output

tab for

Printing Preferences

of the print

driver, change the

Paper Type

setting.

Disable

Toner Saving Mode

on the print driver.

On the

Graphics

tab in

Printing Preferences

of the print driver,

ensure that the

Toner Saving Mode

check box is not selected.

Summary of Contents for DocuPrint P255 dw





























































































































































































































































Search results

Summary of Contents for DocuPrint P255 dw

Reviews:

Related manuals for DocuPrint P255 dw

Brands by name

Popular brands

Fuji Xerox DocuPrint P255 dw, User Manual

Search results

Summary of Contents for DocuPrint P255 dw

Reviews:

Related manuals for DocuPrint P255 dw

Brands by name

Popular brands