background image

48

Printer Connection and Software Installation

Overview of Network Setup and Configuration

To set up and configure the network:

1

Connect the printer to the network using the recommended hardware and cables.

2

Turn on the printer and the computer.

3

Print the System Settings page and keep it for referencing network settings. 

4

Install the driver software on the computer from the 

Software Pack CD-ROM

. For information on 

driver installation, see the section in this chapter for the specific operating system you are using.

5

Configure the printer’s TCP/IP address, which is required to identify the printer on the network. 

Microsoft Windows operating systems: Run the installer on the 

Software Pack CD-ROM

 to 

automatically set the printer’s Internet Protocol (IP) address if you connect the printer to an 
established TCP/IP network. You can also manually set the printer’s IP address on the 
operator panel.

Mac OS X and Linux systems: Manually set the printer’s TCP/IP address on the operator 
panel. To use a wireless connection (DocuPrint P255 dw only), also configure wireless 
network settings on the operator panel.

6

Print the System Settings page to verify the new settings.

NOTE: 

The reports and lists are all printed in English.

If the 

Software Pack CD-ROM

 is not available, you can download the latest driver from our web site: 

http://www.fujixeroxprinters.com/

 

See also: 

• "Printing the System Settings Page" on page 156

Summary of Contents for DocuPrint P255 dw





























































































































































































































































Reviews: