Notes and Restrictions
109
IE
IE
N
otes and Restrictions
This section lists the notes and restrictions that apply to the scanner.
Scan Features
Output size error when scanned in black
When scanned with [Output Color] set to [Black], a pixel error of ±16 may occur when
compared to scanning in [Full Color] or [Grayscale].
Error when scanning 2-sided documents (003-770)
When scanning a 2-sided document from the document feeder, its scan size may
exceed the scannable area depending on the combination of the original size, scan
resolution, and scan ratio. If this happens, the scanner goes into an error state and
displays the error code 003-770. If this error occurs, try scanning at a reduced scan
ratio.
The above error occurs, for example, when a 2-sided A3 document is scanned at 600
dpi and 166% scan ratio.
Creating a backup of Address Book
If you have stored new addresses into Address Book, it is recommended that you
create its backup. The backup can be created under [System Settings] > [Common
Settings] > [Maintenance/Diagnostics] > [Address Book Maintenance].
Refer to
• For more information, refer to "6. System Settings" in the User Guide.
Copy Features
Copying from the bypass tray
When copying on non-standard size paper by selecting [Bypass] for [Paper Supply],
additional settings on the printer may be required. For more information, refer to the
user guide provided for the printer.
Making a 2-sided copy of A3 document (DocuScan C4250)
When making a 2-sided copy of an A3 document ([2 Sided] is set to [1
2 Sided] or [2
2 Sided]), the printer may require an additional memory. For more information, refer
to the user guide provided for the printer.
Changing paper supply option during copying
If you change the paper supply option while running a copy job, the change may not be
reflected on the output.
Paper loaded in the printer in landscape orientation
When the printer accommodates paper of the same size in both portrait and landscape
orientations, only paper loaded in portrait orientation will be used.
Example:When the printer accommodates both A4
and A4
:
• When both trays are loaded: A4
will be used.
• When A4
is not loaded : A4
will not be used, and the scanner
considers that A4 paper has run out.