32
3 Basic Operation
Exiting the Power Saver Mode
To exit the Power Saver mode, press the <Power
Saver> button on the control panel.
Loading Documents
Two choices of document input areas are available: the document glass and duplex automatic document
feeder (hereinafter referred to as the "document feeder").
Use the document feeder when scanning or copying multiple-sheet documents simultaneously.
Note
• If loading additional documents while the first document is being scanned, load them in the same document input area as
the first document.
• You cannot change the document input area during a job. Only one document input area can be used for a single job.
Supported Documents
Documents that meet the following criteria can be scanned from the document glass or document feeder:
*1 Gram per square meter (g/m²) refers to a weight in grams of one square meter of paper.
*2 These values apply when scanning or copying documents 2-sided.
Document Glass
Document Feeder
Document size
C4250
[Max.] 334.5 x 452.0 mm
[Min.] 100.0 x 148.0 mm
[Max.] 297.0 x 432.0 mm
C3200 A
[Max.] 220.0 x 300.0 mm
[Min.] 140.0 x 140.0 mm
[Max.] 215.9 x 355.6 mm
Scan area
C4250
[Min.] 15.0 x 15.0 mm
[Max.] 297.0 x 432.0 mm
[Min.] 100.0 x 148.0 mm
[Max.] 297.0 x 432.0 mm
C3200 A
[Min.] 15.0 x 15.0 mm
[Max.] 215.9 x 297.0 mm
[Min.] 140.0 x 140.0 mm
[Max.] 215.9 x 355.6 mm
Document weight
(Gram per square
meter*¹)
C4250
35 - 120 g/m² (1-sided documents)
50 - 120 g/m² (2-sided documents*²)
C3200 A
60 - 105 g/m² (1-sided documents)
60 - 105 g/m² (2-sided documents*²)
Loading capacity
1 sheet
50 sheets
(plain paper: 60 - 100 g/m²)
