to choose the high channel number, counterclockwise to choose the
low channel number.
The selected channel number display on the screen
Adjusting the squelch
The function of squelch can let the speaker no voice when no signal
input, when open the squelch, you will hear the background voice
from the speaker, contrarily you can not hear.
The squelch which you choose decide where it open or closed, if the
squelch you chose is too high, you will not receive the lower signal, if
the squelch you chose is too low, you will hear the background voice.
When adjusting the squelch:
1. Press the FUNC, then Low
Display “-SqL” and current squelch level.
2. Rotate the channel selector from 0-9 to choose the squelch
clockwise to choose the high squelch, counterclockwise to
choose the low squelch.
3. Press FUNC button finish installation, the level of the squelch
store into the function data. Press the button except FUNC exit
install, it can not be changed about the level of the squelch.
Return to the normal operation
Transmitting
1. According to the different setup for the monitor function, use
MONI button for a moment, make sure that no any transmitting
on the channel you have chosen.
2. Hold on the PTT button then speak to the microphone
1) Please keep about 4-5cm to the microphone, speak with the
normal tone, it can get the best effect for the receiver.
2) When pressing the PTT, the LED turn red.
3. Unclinch the PTT can be received.
Receiving
When you receive any signal, the LED turn green, you can hear the
voice.
If the transmit signal is too low, and you setup the transceiver too
high squelch, you may can’t receive the signal.
