on the current frequency, it can receive and transmit. In the any time
of scanning, if you press the PTT button the transceiver will stop
scanning, the transceiver return to the latest channel and transmit. If
always receive the signal in the period of scanning, it will return to the
start channel and transmit. Finish scanning, press the buttons except
MONI, PTT and LAMP.
Channel locked
You can choose the channels which out of the list of scanning, before
scanning please finish the steps as follows:
1. Rotate the channel selector to choose the channels which out of
the list of scanning.
2. Press the FUNC button then SCAN.
The state of the chosen channel is switch between the through and cut,
the “A” on the screen show that the channel is on the scanning list,
contrarily it is not.
Note: This function just can use on the frequency display mode.
QT and DQT
1. The local dealer may programming the transceiver with the QT
and DQT, when you choose these channels, you can just hear the
same code in the same channel, any others will not receive.
2. This function can let you no need to hear the needless receiving,
although use the QT and DQT you have the own channel, but if
someone else use the same code, it also can receive your call.
Auxiliary functions
Keypad locked
1. This function can prevent accidentally operate to the transceiver.
2. It can lock all the buttons except MONI, FUNC, PTT, Power and
Volume.
3. When lock the buttons, press FUNC for one second then press
CH2F, the screen display “L”.
4. For unlock the same operation.
Keypad voice
