Setup for the provisional different Tx/Rx frequency
This function just can use on the frequency display mode
1. Press FUNC button then SCAN button, the LCD display “
±”
2. Use the keypad and channel selector choose the Tx frequency you
need, press the FUNC button, the selected Tx frequency store into
the current channel. If you press the keypad or other buttons
except FUNC, it will exit the setup mode and the current channel
frequency data can not be changed.
3. On the state of different Tx/Rx frequency, if you do some
operation like change the frequency or scanning, the transceiver
will return to the same Tx/Rx frequency mode.
Beat setup on the frequency mode
1. Press the FUNC button then “*”, LCD display current beat
frequency
2. Rotate the channel selector to choose the beat frequency you need,
press the FUNC button, the selected beat frequency will store to
the date of frequency display mode.
Step frequency setup on the frequency mode
1. Hold on the FUNC button one second then press “*”, LCD
display current step frequency
2. Rotate the channel selector to choose the step frequency you need,
press the FUNC button, the selected step frequency will store to
the date of frequency display mode.
