English
- 6 -
Viewing the Connections - Side Connectors
Video Input is used for connecting video signals of external devices.Connect the
1.
video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on
your device.
Audio Inputs are used for connecting audio signals of external devices. Connect the
2.
audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks
on your device.
Also to enable PC/YPbPr sound connection in such a case, use an appropriate
audio cable between the connected device’s audio outputs and the TV’s audio
inputs
Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable (YPbPr
cable is not supplied) you should also connect your device with an audio cable to
the AUDIO INPUTS of the TV to enable audio.
Headphone jack is used for connecting an external headphone to the system.
3.
Connect to the HEADPHONE jack to use headphones.
Power Connection
IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
HDMI
01_MB45_[GB]_(01-TV)_1900UK_ANALOG_BRONZE11_22880W_10067059_50162270.indd 6
01_MB45_[GB]_(01-TV)_1900UK_ANALOG_BRONZE11_22880W_10067059_50162270.indd 6
05.01.2010 13:07:39
05.01.2010 13:07:39