Registration in the Memory
31
4. As the AUTO-COURSE terminates, the memory
registration confirmation screen is displayed.
Select
“
Yes/No
”
with the
button and press the
[ENTER] button.
5. Select
“
Yes
”
. Registration starts. With the
message
“
Finished
”
on the LCD, the process of
registration is completed.
*
Do not turn the power OFF when the memory registration is
going on. Otherwise, the memory registration will be disabled.
If you start the massage by pressing the QUICK MODE
button (See P21) after the completion of registration, the
chair operates according to the registered program.
In case of the example of use.
Following movements will start based on the
information of your body shape.
“
REFLESH
”
course of
“
SHOULDER
”
Mechanical strength
“
4
”
Air strength
“
3
”
Shoulder massage strength
“
STOP
”
Arm knead massage strength
“
MODERATE
”
Foot Stretch
“
OFF
”
Pulse
“
OFF
”
Skips
“
3D TAPPIN
”
at 5 minutes after the massage start.
Repeats the
“
WAVELET
”
at 9 minutes after the massage start.
*
Mecha. (knead balls) massage strength and air strength are
not registered in the memory.
*
On the air options, registration can be made of the final
stage of the course in the memory.
6. As the memory registration is over, the knead balls
return to the stored position automatically.
To change the content of registered memory (overwrite),
start from the beginning on P29.
To erase the registered memory, refer to another function
(When erasing the registered memory) (P55).
One Point!
You can select other
AUTO-COURSEs based on
the registered body shape
information and air-massage
option information.
STOP
START
/RESET
AUTO
FUNCTION
AIR
REPEAT
SKIP
SHDR
MENU
ARM
ENTER
FOOTREST
RECLINER
HEIGHT
ADJUSTMENT
W/H
LEG
FORWARD
BACK
