SS1807-N002
Instruction of System
-
88/106
A) The image file format is Exif-JPEG or TIFF.
Accordingly, saved images can be displayed by using image viewer software.
B) Dedicated software for viewing the transferred image is not prepared at this time.
C) The EP-6000 does not have the function for viewing the images transferred to the FTP
server.
D) The rough estimation of the number of images to be recorded in the internal memory of
EP-6000 and the number of inspections is as follows.
Maximum
number of
recordable
images (for all
examinations)
Maximum
number of
recordable
images (for each
examination)
Standard number
of recordable
examinations
(100 images /
examination)
Minimum number
or recordable
examinations
(Maximum /
examination)
Compression
rate
JPEG
(1/20)
21,690
800
216
27
JPEG
(1/10)
16,270
750
165
21
JPEG
(1/5)
5,910
500
59
11
TIFF
840
130
8
6
* The number of images which can be recorded varies according to the photo subject.
* When a Full HD supporting monitor is connected and the screen is displayed in Full HD,
images are recorded in SXGA mode screen image.
◆
Note
◆
・
If there are non-transferred images, one of the reasons is considered as network abnormality
or image server abnormality.
It falis again if the images are still transferred with the abnormality.
Check that the network is connected correctly, the hub or router is working normally if it is
connected and check the image server is started normally in advance.
Be sure the network and server are normal and then transfer the image again. Check that
image is recorded correctly on the server.
・
If the images are not necessary though some images are not copied or the images that are
not transferred in backup, search and delete the images, or delete all the images by
initializing the built-in memory.
Must confirm there is no necessary image before deleting them.
Summary of Contents for EP-6000
