SS1807-N002
Instruction of System
-
89/106
7.2 Description
The EP-6000 has a network terminal (RJ45 terminal).
By connecting a twisted pair cable to the network terminal, the EP-6000 is connected to the FTP
server via the network.
7.2.1 Communication System
Protocol: TCP/IP
Application: File Transfer Protocol (FTP)
TheEP-6000 processor becomes an FTP client and sends data to the computer running an FTP
server service.
7.2.2 Connection
Connect to a network switch (switching HUB) or PC.
Depending on the connection condition, use the network switch (switching HUB) or PC
compliant with the safety standards listed below.
Safety standard
Cable type
Remarks
○
Outside the
patient
environment
Network switch
IEC60950
UL60950
Straight
×
PC
IEC60950
UL60950
Cross
×
Inside the
patient
environment
Network switch
EN60601-1
UL2601-1
Straight
No applicable
product
△
PC
EN60601-1
UL2601-1
Cross
Hard to get it
Configuration indicated with “○” is recommended.
[Note] Use a peer-to-peer connection.
[Note] Before connecting to the network, be sure to obtain authorization from the network
administrator.
[Note] After setting the network, turn off and then on the processor.
[Note] Do not communicate beyond the router.
Before using the network, installation of the FTP server application, settings on the server PC
(setting the network, creating a folder for image data, etc.) and settings on the EP-6000 are
required.
Summary of Contents for EP-6000
