SS1807-N002
Failure Analysi
-
19/64
Display
error
code
Classification
level
Display message
(occurrence, response)
Display message
(guidance to
error)
Estimated cause
Trigger of message display
Service response
213
Warning
Internal Memory has a
problem and cannot be
used.
Initialize Internal Memory.
Cause: Internal
Memory is not
initialized or its file
system is
corrupted.
When access was tried with the
setting of using an internal
memory, the states of internal
memory are as follows.
(1) Unformatted
(2) The file system was broken
Same as on the left
After performing backup of the
contents of internal memory in
Windows PC, external memory,
etc., initialize the internal memory
and then try back up again.
In case of repetitive errors after
that, replace the main PCB.
214
Warning
Internal Memory is full.
Cause: Free
space of Internal
Memory is
insufficient.
When access was tried with the
setting of using an internal
memory, data cannot be saved
due to insufficient internal
memory capacity.
Saving in internal memory was
tried.
After performing backup of the
contents of internal memory in
Windows PC, external memory,
etc., initialize the internal memory
and then try access again.
In case of repetitive errors after
that, replace the main PCB.
216
Warning
Some data is not yet
saved.
Save these data in
Internal Memory?
Some data is not yet saved.
・
Some data is not yet saved at
the time when the inspection
finished.
・
Some data is not yet saved at
the time when external memory
was inserted.
・
Some data is not yet saved at
the time when external memory
was initialized.
If displayed even if there is no
unsaved data, replace the main
PCB.
218
Warning
Saving print screen image
failed.
Check External Memory.
Saving in external memory has
failed.
When executing print screen
After backing up the contents of
inserted external memory in
Windows PC, external memory,
etc., perform physical-formatting
instead of quick-formatting of
external memory, insert the
external memory and try saving
again.
In case of repetitive errors after
that, replace the external
memory, USB PCB, main PCB.
219
Information
Free space of Internal
Memory is less than
100MB.
The free space of internal
memory became less than
101MB.
Same as on the left
In the case of repetitive errors
when the free space of internal
memory is 100MB or more, back
up the contents of internal
memory in Windows PC, external
memory, etc., initialize the
internal memory, and then check
again. In case of repetitive errors
after that, replace the main PCB.
Summary of Contents for EP-6000
