SS1807-N002
Caution in Safety
-
5/12
1.2
General Caution
■ Power supply
・
Do not attach / remove parts while power is distributed
.
If above procedure is implemented with power distribute, it may cause electric shock or short
circuit.
・
There are some parts with insufficient electric discharge after turning power off, such as power
supply parts and parts in high temperature (lights), should not be touched
.
・
Extra attention should be paid for adjustment and inspection with power distributed to prevent
from electric shock and short circuit.
・
Do not saturate power cord and plug, and connect plug with wet hand.
It may cause electric shock and short circuit.
■ PCB
Static protection wristband should be worn and human body should be grounded for PCB
maintenance.
Static electrocution in human body may cause damage of electric parts on PCB.
■ Always attach ungrounded parts and fixing screws, protective earth conductor, and power-supply
cord as the way they were.
It may cause failure to form protective earth circuit and may result in electric shock.
■ Safety interlock
Safety interlocks such as fuse, interlock switch and cover should in active states at all time.
■ Rotating parts
Never touch rotating parts
Also pay extra attention to not to catch body part such as hand, leg, hair and cloth into a rotating
equipment.
■ Parts exchange
・
If parts are damaged and/or worn, exchange them with the parts designated in this manual.
■ Labeling
・
Do not remove labels adhered on the equipment(rating plate, caution label and instruction label)
unless designated in this manual.
■ Handling personal information when products are taken away
When taking a product away from customer, delete private information such as patient data saved
in the equipment with customer’s approval.
Fundamentally, do not take media, such as MO disk and Compact Flush, with saved video print
and image file that people can be identified from customer.
Summary of Contents for EP-6000
