SS1807-N002
Failure Analysi
-
55/64
Display
error
code
Classification
level
Display message
(occurrence, response)
Display message
(guidance to
error)
Estimated cause
Trigger of message display
Service response
40026
Warning
Printer ink sheet has run
out.
Replace ink sheet.
To print after
examination,
select the [Cancel]
button.
No remaining amount on the
media IC
At the time of application
start-up, at the time of auto print
start upon examination start
In case of repetitive failures even
if the ink sheet has been
replaced by a new one, replace
the digital printer.
40027
Warning
Printer paper has run out.
Set printer paper.
To print after
examination,
select the [Cancel]
button.
Paper has not yet been set
At the time of application
start-up, at the time of auto print
start upon examination start
In case of repetitive failures in
spite of paper being set, replace
the digital printer.
40028
Warning
Printer paper and ink
sheet sizes do not match.
Match printer paper and
ink sheet sizes.
To print after
examination,
select the [Cancel]
button.
Detected non-designated paper.
At the time of application
start-up, at the time of auto print
start upon examination start
In case of repetitive failures in
spite of correct combination of
ink sheet and paper, replace the
digital printer.
40029
Warning
Printer paper has run out.
Set printer paper.
To print after
examination,
select the [Cancel]
button.
Paper ran out (end hole
detected
)
At the time of application
start-up, at the time of auto print
start upon examination start
In case of repetitive failures in
spite of paper being set, replace
the digital printer.
40030
Warning
Preparation for printing is
in progress.
Please wait for a while.
To print after
examination,
select the [Cancel]
button.
Mechanical portion is being
initialized.
At the time of application
start-up, at the time of auto print
start upon examination start
In case of repetitive failures,
replace the digital printer.
40031
Warning
Adjusting the temperature
of the printer head.
Please wait for a while.
To print after
examination,
select the [Cancel]
button.
Abnormally high heat is
generated.
At the time of application
start-up, at the time of auto print
start upon examination start
In case of repetitive failures,
replace the digital printer.
40032
Warning
Paper jamming occurred
in printer.
Remove paper.
When paper is
removed,
printing resumes
automatically.
Paper jamming occurred.
When error occurred during
manual printing after examination
In case of repetitive failures even
if paper is not jammed, replace
the digital printer.
40033
Warning
Printer ink sheet has run
out.
Replace ink sheet.
When ink sheet is
replaced,
printing resumes
automatically.
Ink sheet has run out.
When error occurred during
manual printing after examination
In case of repetitive failures even
if the ink sheet has been
replaced by a new one, replace
the digital printer.
40034
Warning
Printer paper and ink
sheet sizes do not match.
Match printer paper and
ink sheet sizes.
When printer
paper and ink
sheet sizes match
with each other,
printing resumes
automatically.
Incorrect combination of ink
sheet and paper
When error occurred during
manual printing after examination
In case of repetitive failures in
spite of correct combination of
ink sheet and paper, replace the
digital printer.
40035
Warning
Printer ink sheet is
incorrect.
Replace it with a correct
ink sheet.
When replaced
with a correct ink
sheet,
printing resumes
automatically.
Unusable ink sheet was set.
When error occurred during
manual printing after examination
In case of repetitive failures even
if correct ink sheet is set, replace
the digital printer.
Summary of Contents for EP-6000
