SS1807-N002
Checkup, Replacement and Adjustment
-
2/137
Checkup, Replacement, Adjustment
Precautions during Checkup, Replacement and Adjustment of Each Component
Warning
Start work after the device power has been turned OFF to prevent electric shock.
Caution
・
In maintaining PCB, be sure to wear wristbands to ground your body. Otherwise static
electricity of the body may damage electronic components on PCB.
・
In maintaining PCB, be sure not to apply force on the central part of PCB with both sides of
PCB being held or to bend PCB. Such applied force or bending may cause a crack on a
solder connection portion or a loose connection of a solder connection portion.
・
In maintaining PCB, do not touch connector pins on PCB with your bare hands.
・
Since immediately after the power OFF, the temperature of components has not fallen
sufficiently, there may be residual charge inside electronic elements of the PCB.
Be careful to prevent an electric shock or burn.
・
Inside a machine body, there are components becoming high temperature and terminals
where a large current is flown.
Be careful to prevent an electric shock or burn while the power is turned ON with cover
opened.
◆
Instruction
◆
・
Safety by grounding is maintained by proper connection of power cable and additional protective
grounding and fixing screws of parts.
In order to maintain safety, restore parts and fixing screws which were once removed during the
maintenance operation to the original position of the installation. Confirm by following steps indicated
in this service manual if fixing screws are not loosened and parts are securely fixed after the
restoration.
・
The connector removed during work is installed securely and no oblique insertion.
The connector with lock mechanism is securely lock.
Confirm after restoration.
・
When reinstalling the tapping screw, a specified tightening torque is used.
A screw is impossible in reuse if it rotates in vain.
Summary of Contents for EP-6000
