SS1807-N002
Instruction of System
-
29/106
2.2.6 Patient Information
2.2.6.1 Entry Method Setup
Specifies the Patient Information Entry Screen.
Select either the automatic numbering mode or the fixed “01” mode for new entry of patient
information.
Alternatively, when directly entering the doctor name into the Patient Information Entry Screen,
select the mode for retrieval/non-retrieval of the Doctor List and load the doctor name that
corresponds to the entered name and the doctor page setup.
Move the cursor to the desired menu item using the [↑] and [↓] keys and then press the [Enter]
key.
In the displayed pop-up menu, select the desired item using the [↑] and [↓] keys and then press
the [Enter] key to finalize the setting.
Menu item
Setting
Default
Description
Remarks
Input mode
setting
Auto
Patient
Numbering
○
When patient information is newly enterd
patient number is automatically assigned.
Ficed
Patient
Number
When patient information is newly enterd
patient number is fixed to "01."
2.2.6.2 Padding Setup
For patient ID and examination No., the setting is made for digits that do not satisfy the
specification to be automatically padded with "0".
Menu item
Description
Remarks
Padding
Setting
When the cursor is moved to this item and then the Enter key is pressed,
the "Padding setup screen" appears.
Menu item
Setting
Default
Description
Remarks
Digit number
of
Examination
Number
0-16
0
When an examination No. entered does
not satisfy the specified number of digits,
padding is implemented for an insufficient
portion from the top with 0 to match the
digits.
When 0 is
set for the
number of
digits,
padding is
not
implemented.
Digit number
of Patient ID
0-16
0
When a patient ID entered does not satisfy
the specified number of digits, padding is
implemented for an insufficient portion from
the top with 0 to match the digits.
Save and
Exit
When this item is selected and then the Enter key is pressed, the current settings are
finalized and operation returns to the System Configuration screen.
* When the Enter key is pressed without selecting “Save and Exit”, the current setting
is canceled and operation returns to the System Configuration screen.
Summary of Contents for EP-6000
