26
27
2
To take the picture, press the shutter button
down fully without lifting your finger off it. The
camera beeps and takes the picture, and the
data is then recorded.
●
!
If you press the shutter button down fully in one
motion, the shot is taken without the AF frame
changing.
●
!
When you take a picture, the viewfinder lamp lights
orange (camera not ready) before switching back to
green to indicate that the camera is again ready for
shooting.
●
!
The viewfinder lamp flashes orange while the flash is
charging. If the LCD monitor is switched on, the
screen may go dark for a moment. This is normal
and does not indicate a fault.
●
!
See P.114-116 for information on the warning
displays.
Beep
8
■
Viewfinder Lamp Display
✽
When the LCD monitor is switched on, more detailed warning messages
are displayed (
➡
P.114-116).
Display
Status
Lit green
Ready to shoot.
Blinking green
AF/AE in progress, camera shake warning or AF warning (Ready to shoot).
Blinking green and
orange alternately
Recording to xD-Picture Card (Ready to shoot).
Lit orange
Recording to xD-Picture Card (Not ready).
Blinking orange
Flash charging (Flash will not fire).
Blinking red
h
xD-Picture Card Warnings
No card loaded, card not formatted, incorrect format, card full, xD-Picture Card error.
h
Lens operation error.
h
Very shiny subjects such as a mirror or car body.
h
Subjects photographed through glass.
h
Subjects that do not reflect well, such as hair or fur.
h
Subjects with no substance, such as smoke or flames.
h
When the subject is dark.
h
When there is very little contrast between the subject
and the background (such as white walls or subjects
dressed in the same color as the background).
◆
Subjects Not Suitable for Autofocus
◆
h
Subjects moving at high speed.
h
When something other than your subject is close to the
AF frame, has contrasting areas of light and dark and
is either closer or further away than your subject (as
when you photograph someone against a background
with strongly contrasting elements).
For subjects of this type, use AF/AE lock (
➡
P.30).
Though the FinePix A203/FinePix A303 uses an accurate autofocus mechanism, it may have difficulty focusing
or not be able to focus at all for the types of subject and situation listed below. In such cases, the image may be
out of focus.
◆
Warnings Displayed When
the Shutter is Pressed Halfway
◆
[
The camera cannot focus.
h
Ensure that you are at least 2 m (6.6 ft.) from
the subject when you take the shot.
h
Use AF/AE lock to take the shot (
➡
P.30).
\
There is a high risk of camera
shake due to the slow shutter
speed.
h
Use the flash.
h
Use a tripod.
|
You can take the shot, but it will not
be correctly exposed.
Solution
Solution
TAKING PICTURES (
A
AUTO MODE)
Q
STILL IMAGE
