123
122
Specifications
System
h
Model:
Digital Camera FinePix S3000
h
Effective pixels:
3.2 million pixels
h
CCD
1/2.7-inch square pixel CCD with RGB Filter
Number of total pixels: 3.34 million pixels
h
Storage media
xD-Picture Card
(16/32/64/128/256/512 MB)
h
File format
Still image: JPEG (Exif Ver.2.2), DPOF-compatible
Movie: AVI format, Motion JPEG
✽
Design rule for Camera File system compliant
h
Number of recorded pixels
2048
×
1536 pixels/1600
×
1200 pixels/1280
×
960 pixels/
640
×
480 pixels
h
Lens:
Fujinon 6
×
optical zoom lens F2.8-F3
h
Focus length:
f=6 mm-36 mm
(equivalent to 38 mm-228 mm on a 35 mm camera)
h
Focal range
Normal: Approx. 80 cm/2.6 ft. to infinity
Macro: Approx. 10 cm-80 cm/3.9 in.-2.6 ft.
h
Shutter speed
Auto/SP:1/4 sec. to 1/1500 sec. SP(Night scene mode only):3
sec. to 1/250 sec.Manual(A.priority):1/2 sec. to 1/1500 sec.
h
Aperture:
F2.8/F4.8/F8.2 (Wide-angle) F3/F5.2/F8.7
(Telephoto) automatically selected
h
Sensitivity
At flash off:Equivalent to ISO 100
At flash on:Equivalent to ISO 100-200(automatically selected)
h
Exposure control
64 zones TTL metering, Program AE
(exposure compensation available in Manual mode)
h
White balance
Auto (7 positions selectable in Manual mode)
h
Viewfinder:
0.33 inches 110,000 pixels electronic viewfinder
h
LCD monitor
1.8-inches, 62,000 pixels amorphous silicon TFT
h
Flash (Auto flash using flash control sensor)
Effective range: Wide Approx. 0.3 m-3.5 m (1.0 ft.-11.5 ft.)
Tele Approx. 0.8 m-3.5 m (2.6 ft.-11.5 ft.)
Flash modes: Auto, Red-Eye Reduction, Forced Flash,
Suppressed Flash, Slow Synchro, Red-Eye
Red Slow Synchro
(when the pop-up flash is stowed: Suppressed Flash)
h
Self-Timer:
Approx 10 sec. timer clock
h
Video output:
NTSC/PAL selectable
h
Power supply
Use one of the following:
• 4AA-size alkaline batteries
• 4AA-size Ni-MH (Nickel-Metal Hydride) batteries (sold
separately)
• AC Power Adapter AC-5VH/AC-5VHS (sold separately)
Input/Output Terminals
Power Supply and Others
h
Video output socket
2.5mm dia. jack
h
(USB) socket
For file transfer to a computer
h
DC Input
Socket for specified AC Power adapter AC-5VH/AC-5VHS
(sold separately)
Troubleshooting
Possible causes
Solutions
Frame earse does not
erase the frame.
Some frames may be protected.
Unprotect frames using the camera on which
the protection was first applied.
The ERASE ALL function
does not erase all the frames.
Can’t format the
xD-
Picture Card
.
The
xD-Picture Card
contact area is soiled.
Wipe the
xD-Picture Card
contact area with a
clean dry cloth.
When the camera is connected
to a personal computer (PC),
the shot image appears on the
camera’s LCD monitor.
i
The FinePix S3000 USB cable (included) is
not properly connected to the computer or
camera.
i
The PC is not switched on.
i
Set up the camera and the FinePix S3000
USB cable (included) correctly.
i
Switch the PC on.
Screens are not displayed
in English.
A language other than English is selected in
the “LANGUAGE” setting in SET-UP. (
➡
P.78)
Select
“
ENGLISH
“
in the
“LANGUAGE“
setting in SET-UP.
The camera no longer
works correctly.
The camera has suffered an unforeseen
problem.
Briefly remove the batteries or disconnect the
AC power adapter. Then reload the batteries
or reconnect the AC power adapter and try
again.
Nothing happens when I
use the Mode switch.
i
Camera malfunction.
i
The batteries exhausted.
i
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power adapter
and try again.
i
Replace the batteries.
Troubleshooting
e
If you think the camera is faulty, check the following once more.
