43
Advanced
Features
42
Selecting Macro mode allows you to take close-up
shots.
Set the Power switch to “
q
”.
h
Focal range
Wide-angle : Approx. 0.1 m to 2.0 m
(0.3 ft. to 6.6 ft.)
Telephoto
: Approx. 0.9 m to 2.0 m
(3.0 ft. to 6.6 ft.)
h
Effective flash range
Approx. 0.3 m to 2.0 m (1.0 ft. to 6.6 ft.)
33
33
P
500
500 F5.6
F5.6
ISO 200
ISO 200
Press the “
e
” (
d
) Macro button. The “
e
” appears on
the screen indicating that you can take close-up shots.
To cancel Macro mode, press the “
e
” (
d
) Macro
button again.
●
!
Macro photography is automatically cancelled in the following
situations :
i
When the Mode dial is switched to “
r
” or “
?
”
i
When the camera is switched OFF
●
!
Select the appropriate Flash mode for the conditions.
●
!
If you are shooting in a dark location (when the “
|
” camera
shake warning icon is displayed), use a tripod to prevent
camera shake.
Aperture
M
33
33
1000
1000
F8
F8
ISO 200
ISO 200
>
MANUAL
STILL PHOTOGRAPHY FUNCTIONS
Set the Mode dial to “
>
”.
Manual mode allows you to set any shutter speed
and aperture setting.
h
Shutter speed settings
2 sec. to 1/2000 sec. in 1/3 EV steps
h
Aperture settings
Wide-angle : F2.8 to F8 in 1/3 EV steps
Telephoto
: F3.2 to F9 in 1/3 EV steps
M
33
33
500
500 F5.6
F5.6
ISO 200
ISO 200
Setting the shutter speed
You can set the shutter speed by pressing the “
a
”
or “
b
”.
●
!
In shots with long exposures, noise (dots) may appear on the
image.
●
!
When pictures are taken with a fast shutter speed (1/2000
sec.), smearing (white stripes) may appear in the image
(
➡
P.107).
●
!
At fast shutter speeds (1/2000 sec.), the image may appear
dark even if the flash is used.
●
!
See P.107 for information on EVs.
Setting the aperture
To set the aperture setting, hold down the “
D
”
Exposure compensation button
1
and press “
a
” or
“
b
”
2
.
◆
The exposure indicator
◆
Use the exposure indicator on the screen as a guide
when setting the exposure.
When the brightness of the subject is outside the
camera’s brightness metering range, the indicator
moves to the (+) end to show that the image will be
overexposed (the (+) turns yellow) or to the (–) end to
show that the image will be underexposed (the (–)
turns yellow).
M
33
33
1000
1000
F8
F8
ISO 200
ISO 200
0
2
0
1
e
MACRO (CLOSE-UP) PHOTOGRAPHY
STILL PHOTOGRAPHY FUNCTIONS
◆
When you are using the flash
◆
When you use the flash in Macro mode, remove the
lens adapter ring.
If the adapter ring is not removed, a shadow may
appear in the bottom center of your shot.
Shutter speed
Exposure indicator
Summary of Contents for FinePix S5000
Page 56: ......