FinePix S5800/S800 Service Manual
2-8
2. Disassembly
Confidential: FUJIFILM Service Center Use Only
2-7.
Removing the LENS
(1) PEEL off the CA-1 HOLDER SHEET A.
(2) Remove the screw (1.4 x 2.5).
(3) Remove the EARTH HOLDER A.
(4) Remove the 2 screws (1.4 x 3.0).
(5) Remove the EARTH HOLDER B.
(6) Remove the CA-1 HOLDER.
(7) Remove the STRAP EARTH.
(8) Remove the 4 screws (1.7 x 4.0).
(9) Press straight down on the SLIDE RETURN
HOLDER (pale orange) and pop up the FLASH
UNIT.
(10) Lift up the LENS HOLDER BLOCK in the direction of
the arrow.
1
2
3
5
6
4
7
10
9
8
