FinePix S5800/S800 Service Manual
4-13
4. Adjustments
Confidential: FUJIFILM Service Center Use Only
4-10. AWB Adjustment
(Shutter adjustment, CCD sensitivity adjustment, white balance adjustment, AE adjustment)
<Settings used for AWB adjustment>
<Step 1>
Position the camera in front of the pattern box as shown in
Fig. 4-10-1.
<Notes>
If the pattern box is not correctly calibrated, an error will
occur during camera adjustment and it will not be possible to
complete the adjustment successfully.
Also, if soiling on the diffusion plate or reflective plate in the
pattern box causes blurring of the light source, adjustment
errors may occur. The pattern box should be regularly
cleaned and checked.
<Fig. 4-10-1>
Camera
Pattern box
Maximum
5mm
Centerline
<Fig. 4-10-2>
<Step 2>
In the adjustment selection window, select [AWB] adjustment.
--> The AWB adjustment confirmation window appears.
