15
Getting
Ready
1
14
TURNING ON AND OFF
Press the “
w
” button during shooting to change to
Playback mode.
Press the “
w
” button again to return to
Photography mode.
Move to Photography mode or Playback mode
Turn the camera on in Photography mode
Open the lens cover completely so that it will
not move further. The camera is turned on in
Photography mode.
Close the lens cover until it stops. The camera
is turned off in Photography mode.
Turn the camera on in Playback mode
CHARGING THE BATTERY (USING THE CRADLE)
The indicator lamp lights red and battery charging
begins. When charging is completed, the indicator
lamp turns off.
h
Full recharging times for completely depleted
battery
At an ambient temperature of +21°C to +25°C
(+70°F to +77°F)
NP-40: approx. 2 hours
●
!
Charging times increase at low temperatures.
●
!
If the indicator lamp blinks during charging, a charging error has occurred and the battery cannot be charged. If this
occurs, see P.103.
●
!
Turning the camera on during charging interrupts the charging.
●
!
Use the BC-65 Battery Charger (sold separately) to charge battery more quickly (
➡
P.97).
Remove the camera from the cradle.
●
!
Hold the camera up vertically when removing the camera
from the cradle.
3
4
1
2
0
1
0
2
Lit red
1
Plug the AC power adapter connector into the
“DC IN 5V” socket on the cradle.
2
Plug the AC power adapter into a power outlet.
h
Compatible AC power adapters
AC-5VW (included)
AC-5VX (sold separately)
AC-5VH (sold separately)
AC-5VS (sold separately)
AC-5VHS (sold separately)
●
!
Always use the FUJIFILM products listed on the above.
●
!
See P.99 for notes on using the AC power adapter.
●
!
Do not connect the AC power adapter directly to the camera
to charge the battery.
●
!
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
●
!
The shape of the plug and socket-outlet depends on the
country of use.
Check that the camera is turned off. Set the
camera in the cradle.
●
!
Only connect and disconnect the AC power adapter when the
camera is off.
Connecting or disconnecting the AC power adapter while the
camera is on temporarily interrupts the power supply to the
camera, so that images or movies being shot are not
recorded. Failing to turn the camera off first can also result in
damage to the
xD-Picture Card
or malfunctions during PC
connection.
●
!
Plug the camera securely and vertically into the cradle
connecting plug.
◆
Charging the battery
◆
When you try to charge the battery immediately after the camera has been used continuously for a long
period (e.g. shooting a movie or connected to a PC), charging may not begin soon (the indicator lamp
does not turn red).
This is not a camera fault, but is for protecting the battery from being charged while it is warm. Battery
may degrade when charged at high temperatures.
Leave the camera connected to the cradle, and charging will automatically begin within 30 minutes.
Power-OFF
Power-ON
Leave the lens cover closed.
Press the “
w
” button for about 1 second to
turn the camera on in Playback mode.
Press the “
w
” button during playback to turn
the camera off.
Power-ON/OFF
Close the lens cover
Shooting
b
a
Playback
●
!
Press the shutter button or turn the mode switch to return to
Photography mode.
◆
Auto power off function
◆
If the camera is left unused for 2 or 5 minutes, the Auto power off function turns the camera off
(
➡
P.77).
To restore power to the camera to take pictures, briefly close and then re-open the lens cover
completely so that it will not move further.
To play back images, hold down the “
w
” button for about 1 second.
Summary of Contents for FinePix Z1
Page 56: ...111 110 ...
