4. Adjustment and Inspection
FinePix4800Zoom(U/E/EG) SERVICE GUIDE
20
4-3-2. FFWJ217.EXE Command Description
Menu
Command
Details
Operation
Start
Program start
Stop
Program stop
Temporary stop Temporary program stop
Step 0
Do not use
End
Terminate program
Program
Reload
Program (*.ff) reload
Select
Program (*.ff) select
Edit
Program (*.ff) edit
Data
ad[ ]
Do not use
rd[ ]
Do not use
SW
Do not use
fsw
Do not use
EVR
Data write/read from
EEPROM (see 4-3-6.)
Mode
File record
Do not use
NGSTOP
Program stopped if
adjustment is NG
STEP
Do not use
LINE
Do not use
AUTO
Do not use
Setting
OKNG clear
Do not use
Mode set
Sets up mode
Automatic adjustment Execution setting for Auto
Adjust in user program
Help
Help
Basic software help
FF help
User program help
Focus
Not used with this
adjustment software
Version
Version information for
basic software
<Fig.J> EVR Write/Read Display Screen
<Fig.K> EVR Write/Read Operation Screen
(1)
<Table 1> FFWJ217.exe Commands
* Do not alter the user program (FinePix 4800ZU_E) un-
der any circumstances. The software will not run if
it has been altered in any way.
4-3-3. Writing and Reading From the
EEPROM
This adjustment software may be used in the same
manner as the adjustment remote (RM95B) to write
and read data from the EEPROM. Use the following
procedure.
<Step 1>
Display the screen for selection of PC-camera ad-
justment items (see P20).
<Step 2>
Select Data--->EVR from the menu on the Adjust-
ment Items Select Screen (Fig.J-(1)--->Fig.J-(2)).
<Step 3>
EVR Data is displayed (Fig.K). See Table 2 above
for details of the EVR Data menu bar (Fig.K-(1)).
(1)
(2)
<Table 2> EVR Data Display Commands
Item
10/16
ROM
ROM
+1
-1
FD symbol
All RD (green
text)
All RD (pink
text)
PAGE
ADDR.
Details
Decimal
↔
Hexadecimal
conversion
Redraw
Read ROM
Write ROM
+1 & RAM write (data not
written to F_ROM)
-1 & RAM write (data not
written to F_ROM)
Record
ROM screen ROM
data read
RAM screen RAM
data read
Page specification
Addres specification
Description
Decimal
↔
hexadecimal conver-
sion of EVR data
Redisplay EVR data
Read data from F-ROM
Write data to F-ROM
Decrement specified
data by 1
Decrement specified
data by 1
Save EVR data
One page (address
256h) of data
One page (address
256h) of data
Page specification
(move to specified page)
Addresses specification
(move to specified address)
→→
