25
4.Adjustment and Check
FinePix6800Zoom(U/E/EG) SERVIS GUIDE
Fig.30
Fig.31
Fig.32
Fig.33
Follow the instructions given to complete the BATT
voltage adjustment.
You will return to the boot screen once the BATT voltage
adjustment is completed. Follow the instructions
displayed, re-open the USB port, and continue the
adjustments. (Fig. 30)
E: DC JAC
K
voltage adjustment
Press E on your PC keyboard to select DC JACK voltage
adjustment from the adjustment menu.
Follow the instructions displayed, and when preparations
are complete press Enter. (Fig. 31)
Press Enter to return to the menu.
F: Image sensor adjustment
Image sensor adjustment is accomplished in the following
order:
[Shutter adjustment], [Aperture sensitivity adjustment],
[ISO sensitivity adjustment], [WB adjustment], [AE
adjustment], and [Offset level adjustment].
While making the adjustment, instructions for preparing
the Pattern BOX or the Filter (LB140) will be displayed.
Follow these instructions.
Press F on your PC keyboard to select Image sensor
adjustment from the adjustment menu.
Follow the instructions displayed, and when preparations
are complete press Enter. (Fig. 32)
[Shutter adjustment]
When the Enter key is pressed a message will appear asking
for the Filter to be removed. When this is accomplished press
Enter again.
When the Enter key is pressed at the end of the Shutter
adjustment, a message for the Aperture sensitivity adjustment
will be displayed. Follow the instructions given. (Fig. 33)
