安全に関する情報
– Safety Information
FRC-200S-1
Usable Limit of Main Components
Parts Name
Limit for Replacement
Rotor Blade
The height of Rotor Blade: Lower than 9.9mm
The length of Rotor Blade: Shorter than 69.3mm
Uneven Wear
The surface of the Rotor Blade gets rough.
The edge of the Rotor Blade is cracked.
Cylinder
Closest-contact point: Thinner than 7.47 mm
Concave spots can be seen in the inner wall of the Cylinder
Bearing
Play between the inner lace and the outer lace is rather big.
Noise can be heard in rotation.
Rotation is not smooth.
Trouble Shooting
Symptom
Cause
Countermeasure
Spindle not turning
No air supply
Open the line valve or the throttle valve.
Turning is slow
Lubrication not enough
Supply turbine oil to the motor part and
lithium grease to the gear part
Air line filter is clogged
Clean the air filter
Malfunction of air motor
Repair is needed
Shaving capacity is
down
Lower air pressure
Increase air pressure
Lubrication not enough
Supply turbine oil to the motor part and
lithium grease to the gear part
Air line filter is clogged
Clean the air filter
Malfunction of air motor
Repair is needed
Cutter is worn
Replace it with brand new one
Cutter Spindle is not
rotating smoothly
Cutter Spindle is worn
Repair is needed
Machine Housing gets
higher in temperature
Lubrication not enough
Supply turbine oil to the motor part and
lithium grease to the gear part
Oil supply speed of the Oiler must be made
faster
Copyright
© Copyright 2020, Fuji Industrial Technique Co., Ltd,
2-1-15
, Kamiji, Higashinari-ku, OSAKA 537-0003, JAPAN
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to
trademarks, model denominations, part numbers and drawings. Use only authorized parts. Any damage or mal- function caused by
the use of unauthorized parts is not covered by Warranty or Product Liability.
Summary of Contents for FRC-200S-1
