Turn off power
When the massage function in a state of start-up, click
massage on/off
will turn
off all the massage function.
Confirm the intelligent terminal (smart phone or tablet) in good connection with
the blue tooth of the chair in standby mode.
Open application program
click
service
enter into auto
massage program updated interface .
Click
on/off
into auto program download number choice , click
choose auto-massage program number ( Remote controller screen display
A2
and
App
) , click
confirm
again.
Click
connect test
test the connection between intelligent terminal and
blue tooth of chair. Prompt window display
test successful
when the
connect is right , otherwise , it will display
test error
.
After test successfully, choose firmware path document , click
scan
to
choose irestAuto1.bin
The last step is click
firmware update
into auto massage program update,
the prompt window display
download successful
( remote controller screen
display
OH
) if updated finished , otherwise the it display
download
error
to alarm updated failure. ( remote controller screen display
EA
).
OK
Figure 1
Massage chair
Massage chair
Method of usage
Method of usage
Wireless blue tooth music player operation
Instruction manual
Instruction manual
Buttons
Description
Testing
Path
Upgrade
program
Start/exit
Auto-massage programs
Number selection
Start or exit app upgrade downloaded function
Auto massage program No. Choice
Confirm download address
Intelligent terminal and the blue tooth of massage chair are in
good connection
Choose the downloaded app document ( document. Bin )
Start to download app document
For example : Currently required download App auto program
irestAuto1.bin
in A2 mode .
Audio devices with blue tooth function (such as mobile , MID, tablet ) match with the
chair blue tooth. The music transferred by the wireless blue tooth and played in the
chair speaker.
Audio device match with massage chair through blue tooth , please refer to above.
End massage, power off
POWER INPUT
FUSE
ON/OFF
TOUCH SCREEN
CONTROLLER JACK
Diagram of the switch position of power supply
Method of turn off power
The power cord can plug from the power outlet only after the chair
power switch turn off
Arm assembly installation
1.Find out the plug respond to the arm rest on the bottom of the seat frame, and through
out from the square hole which on the fixed steel board.(figure 1)
2.Draw out the plug from the square hole on the steel board, respond to every connecting
plug( figure 2)
Figure 2
3.Draw out the plug on the bottom of the seat frame and connect with the arm rest joint,
air pipe responded to the right place (figure 3)
4.After connect the responded connector, insert it gently through the square hole on the
bottom of the seat frame, be careful not to fold the air pipe (figure 4)
Figure 3
Figure 4
Insert into the bottom
of the seat frame
NOTED
