16
Before using the chair
Switch on the power
Checklist
Plug in the power cord.
Check whether the power cord, remote control cord or power
plug are not damaged, and that there are no pins or debris
on the plug.
Switch on the power switch.
The power switch is located to the buttom of the left armrest.
After the power is siwtched ON, the displays on the right will be displayed alternately.
Always check the surrounding area of the chair.
Always check behind the chair, and the area in front of and under the footrest for people,
pets and other items.
<the standby position>
!
button is pressed to start the massage, the footrest will automatically elevate
to an approximately 50°angle.
1
1
2
2
Check underneath the back pad to make sure that
there are no rips or tears in the cover cloth of the
seat back.
* Should there be any rips or tears, no matter how
small, immediately discontinue use, disconnect the
power cord, and ask for repairs to be conducted.
Check whether the power cord, remote control
cord or any other items are not caught in the chair.
Check the position of the knead balls before use.
The knead balls are usually
located in their stored positions
(retracted in the lower part of the
seat back)
If the knead balls are not in
their stored positions pressing
the
will return them to
their stored position.
Check the position of the footrest
before use.
Do not try to sit down on the
chair when the footrest is in
its upright position.Doing so
may result in injury. Press
the FOOTREST
button or
the
button and the footrest will come down.
Pressing the
button will raise the seat back as well.
WARNING
Do not use the chair other than on the designated
voltage.
Do not use the chair when the power cord or its
plug is damaged, or when the receptacle is loose.
Contact your point of purchase for repairs if
the power cord or power plug are damaged in
anyway.
Continued usage may result in electric shocks,
:
Check the chair itself.
Pillow
Back pad
Stored position
1
2
