②
If the unit does not work properly, please consult page 13
“Trouble shooting” for further guidance.
5 How to use
1.
Adjusting the direction of airflow
The cool air duct can be adjusted, so please operate the unit after having pointed it in the desired direction.
Horizontal adjustment Vertical adjustment
The cool air duct can be turned approximately 300 The cool air duct is flexible and can be bent in
degrees. any desired way within its possible range.
Note
①
Bend the cool air duct gently, firmly holding the duct
elbow with your other hand.
** The duct can get damaged if forcedly bent too far.
②
If something is dropped into the exhaust air vent, do
not use a stick or similar object to try to retrieve it.
** You may damage internal parts and cause malfunction.
③
Where the duct’s attachment peg and the air vent’s
attachment notch align, the unit comes off. Therefore
use the cool air duct within the indicated range.
2.
The drain tank
（
1
）
The drain tank collects the condensed water
Part of the condensed water that appears in the upper cold part of the heat exchanger on the front of
the unit vaporizes when it passes through the warm lower part on the way down to the drain tank. In
Important: To ensure safety, read section one “1 For your safety! “
